Home Interview Questions and AnswersPlacement Papers with AnswersDell Dell Palacement paper For Computer Hardware Part-1

dell 1Computer Hardware

1. How many devices can be used on a single SCSI bus? Keep in mind that the SCSI host adapter counts as a device.
A. 1
B. 8
C. 20
D. 10
E. All of the above

2. To install a second IDE drive into a computer, you must:
A. Set the master-slave jumper to slave on the second drive
B. Use the IDE configuration software to set the new drive as slave
C. Verify that you define the new drive as D: in the CMOS setup
D. Verify that you attach the drive to the connector at the end of the ribbon cable
E. None of the above

3. In ROM BIOS, the acronym BIOS stands for:
A. Basic Intuitive Output Set
B. Basic Input Organizational System
C. Basic Input Output System
D. Basic Industry Operating System
E. None of the above

4. How many pins on a VGA?
A. 15.
B. 9
C. 25
D. 32
E. None of the above

5. What is modified when changing the system start-up boot sequence?
A. BIOS/CMOS
B. CONFIG.SYS
C. autoexec.bat
D. COMMAND.COM
E. None of the above

6. Which is NOT typically a Field Replaceable Unit?
A. System ROM
B. Power supply
C. System chassis
D. Video controller
E. None of the above

7. What are the most likely conditions for ESD?
A. Cold and wet
B. Cold and dry
C. Hot and wet
D. Hot and dry
E. None of the above

8. Which type of cable is most likely in use with rj-45 connectors?
A. 10base2
B. 10base5
C. 10baseT
D. 10baseFL
E. None of the above

9. Which controller would support an external CD-ROM drive?
A. ESDI
B. ARLL
C. MFM
D. SCSI
E. None of the above

10. You should never put floppy drives, hard drives, or even VCR tapes or cassette tapes on top of speakers (or near any other source of magnetism) because of:
A. RFI
B. EMI
C. EXE
D. FYI
E. IOU

You may also like

Leave a Comment