Home Interview Questions and AnswersTechnical Interview Questions and AnswersElectronic Electronic Interview Questions and Answers For Graduates Part-2

electronic11. What is demodulation?

Demodulation is the act of removing the modulation from an analog signal to get the original baseband signal back. Demodulating is necessary because the receiver system receives a modulated signal with specific characteristics and it needs to turn it to base-band.

12. Name the modulation techniques.

For Analog modulation–AM, SSB, FM, PM and SM
Digital modulation–OOK, FSK, ASK, Psk, QAM, MSK, CPM, PPM, TCM, OFDM

13. Explain AM and FM.

AM-Amplitude modulation is a type of modulation where the amplitude of the carrier signal is varied in accordance with the information bearing signal.
FM-Frequency modulation is a type of modulation where the frequency of the carrier signal is varied in accordance with the information bearing signal.

14. Where do we use AM and FM?

AM is used for video signals for example TV. Ranges from 535 to 1705 kHz.
FM is used for audio signals for example Radio. Ranges from 88 to 108 MHz.

15. What is a base station?

Base station is a radio receiver/transmitter that serves as the hub of the local wireless network, and may also be the gateway between a wired network and the wireless network.

16. How many satellites are required to cover the earth?

3 satellites are required to cover the entire earth, which is placed at 120 degree to each other. The life span of the satellite is about 15 years.

17. What is a repeater?

A repeater is an electronic device that receives a signal and retransmits it at a higher level and/or higher power, or onto the other side of an obstruction, so that the signal can cover longer distances without degradation.

18. What is an Amplifier?

An electronic device or electrical circuit that is used to boost (amplify) the power, voltage or current of an applied signal.

19. Example for negative feedback and positive feedback?

Example for –ve feedback is —Amplifiers And for +ve feedback is – Oscillators

20. What is Oscillator?

An oscillator is a circuit that creates a waveform output from a direct current input. The two main types of oscillator are harmonic and relaxation. The harmonic oscillators have smooth curved waveforms, while relaxation oscillators have waveforms with sharp changes.

You may also like

Leave a Comment