Home Interview Questions and Answers Network Interview Questions and Answers For Graduates Part-2

network11. What is Pipelining ?
In networking and in other areas, a task is often begun before the previous task has ended. This is known as pipelining.
 12. What is Piggy Backing?
A technique called piggybacking is used to improve the efficiency of the bidirectional protocols. When a frame is carrying data from A to B, it can also carry control information about arrived (or lost) frames from B; when a frame is carrying data from B to A, it can also carry control information about the arrived (or lost) frames from A.

 13.  What are the two types of transmission technology available?
(i) Broadcast and (ii) point-to-point

14. What is Bandwidth?
Every line has an upper limit and a lower limit on the frequency of signals it can carry. This limited range is called the bandwidth.

15. Explain RIP (Routing Information Protocol)
It is a simple protocol used to exchange information between the routers.

16. What is subnet?
A generic term for section of a large networks usually separated by a bridge or router.

17. What is MAC address?
The address for a device as it is identified at the Media Access Control (MAC) layer in the network architecture. MAC address is usually stored in ROM on the network adapter card and is unique.

18. What is multiplexing?
Multiplexing is the process of dividing a link, the phycal medium, into logical channels for better efficiency. Here medium is not changed but it has several channels instead of one.

19. What is simplex?
It is the mode of communication between two devices in which flow of data is unidirectional. i.e. one can transmit and other can receive.
E.g. keyboard and monitor.

20. What is half-duplex?
It is the mode of communication between two devices in which flow of data is bi-directional but not at the same time. ie each station can transmit and receive but not at the same time.
E.g walkie-talkies are half-duplex system.a

You may also like

Leave a Comment